- Viewing the current position
- Taking photos
- Motor load
- Motor position plot
- What’s next?
The controls at the top of the panel allow you to view FarmBot’s current position, manually move it in real-time, take photos, and go to home or find home.
The current position of your FarmBot (MOTOR COORDINATES (MM)) is shown in the gray fields directly below the X-AXIS, Y-AXIS, and Z-AXIS labels. This information is updated in real-time.
If your FarmBot has encoders (Genesis kits only), you can also view SCALED ENCODER (MM) data, as well as RAW ENCODER DATA for each axis. Toggle the display of this additional information from the menu in the top right of the panel.
There are three types of movements you can perform in this panel: relative movements, absolute movements, and finding home.
Move FarmBot a relative distance from the current location in any direction by using the
100mm, though you can also select
Depending on your hardware settings, you may not be able to move to negative coordinates or past the specified axis maximums. When this is true, some arrow buttons may be disabled. In the example below, because FarmBot is at the home position (0, 0, 0), half of the arrow buttons are disabled to allow only movements away from the home position and not through it.
Depending on how you usually view your FarmBot, you may need to change which direction each arrow button sends your FarmBot so that the virtual controls match your real-life perspective. For example, if you usually view your FarmBot from the front (looking at the FarmBot logo on the tool head), you would want the
negative Y direction. If you usually view your FarmBot from the side with the electronics box, you would want the button to send FarmBot in the
negative X direction.
You can change the direction along each axis that the arrow buttons send your FarmBot by using the Invert Jog Button toggles in the menu in the top right of the panel. You can also swap the X and Y axis buttons, which will also rotate the map in the farm designer by 90 degrees.
You can also perform relative movements from sequences by using the Move command and selecting offset from current location in the LOCATION dropdown. For more information, see the move command documentation.
Move FarmBot to an absolute position by typing in new coordinates to the white input fields for the X-AXIS, Y-AXIS, and Z-AXIS and then pressing.
FarmBot will operate all axes at once to get to the new position as fast as possible.
If you do not type in a new value for any of the axes, then FarmBot will maintain its current position along that axis and only move the needed axis or axes.
Thebutton will instruct FarmBot to automatically find the home position for all axes in the order Z, Y, X.
FarmBot must have home-finding hardware such as encoders, stall-detecting stepper drivers, or limit switches in order to automatically find the home position.
If you do not have home-finding hardware, you can change the behavior of the
(0, 0, 0) as though you had used the move absolute input fields. Change the home button behavior by setting the PERFORM HOMING (FIND HOME) setting to OFF in the menu of the panel. Note that the go to home behavior will move all three axes at once.
The photos panel.button will take a photo at FarmBot’s current location. Photos can be viewed in the
View the latest, recent maximum, and recent average MOTOR LOAD for each each axis by clicking the load indicator bars below each axis label.
Motor load indicators are only available for FarmBot Express bots with STALL DETECTION enabled.
To view a graph of motor positions over time, toggle ON the motor position plot in the menu of the panel.