Firmware

Select the firmware to be used with your electronics board. This will flash the selected firmware to the microcontroller. Pressing FLASH FIRMWARE will manually flash the firmware, which may be required when installing a new electronics board.

Firmware path

This advanced setting is not shown by default.

View and change the firmware device path. Select ttyACM0 for Genesis, ttyAMA0 for Express, or choose Manual input to select a custom device path. This value is automatically set based on FarmBot model for most users, but can be configured for custom setups with multiple serial devices connected.

Restart firmware

This will restart the firmware. This may be useful for developers.