- Creating peripherals
- Controlling peripherals
- Deleting peripherals
- What’s next?
The PERIPHERALS section of the controls panel allows you to manage FarmBot’s peripherals and control them in real-time with toggle switches and sliders.
To create a new peripheral, press Name, Select a pin , and choose
Analog to define the peripheral. Pressing will add all of the standard peripherals included with your FarmBot kit.
Pin numbers are required and must be unique.
When finished editing, press.
You can press a toggle switch to manually control digital peripherals when FarmBot is connected and idle. If FarmBot is disconnected or busy, pressing a toggle switch will have no effect. Refer to the table below for all possible states of the toggle switches.
|When a toggle is||The peripheral’s state is||Clicking the toggle will|
|ON||ON||Turn the peripheral OFF|
|OFF||OFF||Turn the peripheral ON|
|Unknown||Turn the peripheral OFF|
|ON||ON||Not have any effect (FarmBot is busy)|
|OFF||OFF||Not have any effect (FarmBot is busy)|
|Unknown||Not have any effect (FarmBot is not connected)|
Analog peripherals can be controlled with the sliders when FarmBot is connected and idle.
To delete a peripheral, pressand then the peripheral’s button. Finish editing by pressing .
You cannot delete a peripheral that is in-use by a sequence.