You generally will not need to manually control FarmBot, since it acts automatically from instructions provided by Farm Events. But in case you want to show off to your friends, you can do that from this page!

Widgets on this page:

Controls
Click a widget in the image to learn more!

Move

move.png

  • The current position of your FarmBot (Motor Coordinates (mm)) is shown in the grey fields directly below the X-AXIS, Y-AXIS, and Z-AXIS labels. This information is updated in real-time.
  • You can move the device a relative distance in any direction by using the arrow buttons. The default move amount is 100mm, though you can also select 1, 10, and 1000mm amounts. Depending on your settings in the Hardware configuration widget on the Device page, you may not be able to move to negative coordinates or past the specified axis maximums.
  • The home button will move FarmBot to zero for all axes by first moving the Z axis to zero, then the other axes to zero.
  • You can move the device to an absolute position by typing in new coordinates to the input fields labeled X-AXIS, Y-AXIS, and Z-AXIS and pressing GO.
  • If you ever need to immediately halt your FarmBot, press the E-STOP button.
  • You can switch the directions that the jog buttons move by toggling the axis inversion in the settings menu (gear icon next to the e-stop button). Encoder data can be displayed in the settings menu as well.

Peripherals

You can manually operate FarmBot’s peripherals using the toggle switches in the Peripherals widget.

The pins can be changed to the pins used when plugging in the peripherals in this step of the hardware documentation.

peripherals_unknown.png

Press the toggle switch to turn a peripheral ON or OFF.

Edit

To change the peripherals, press EDIT.

Peripherals Edit.JPG

Add a new peripheral by pressing the + button and filling out Label and Pin #. To delete a peripheral, press it’s - button. When finished editing, press SAVE.

Note that pin numbers are required and must be unique.

Webcam Feeds

webcam.png

The Webcam Feeds widget can be used for a network stream setup using a webcam. You could use the video stream for a view of the entire bot to view movements while controlling it remotely, or you could set up a webcam at a different angle for viewing plants, etc..

You will need to set up a network webcam, and provide the network stream’s IP address to the widget.

Edit

To set the webcam URL, press EDIT, enter a URL (with http://) and press SAVE.

webcam_inputs.png